Clear Etched Lg Stix (Pack of 5)

They are finally here! Our freshly etched stir stix. These clear, light weight stix are about 3/16 inches thick, 1 inch wide and 9 inches long. This is a pack of 5 large stix and all have our new merch logo etched in! We decided to create these special sticks because we got tired of all of the waste when using Popsicle sticks. We thought "why not create something that paint and resin won't stick to that can be reused over and over again" ~ thus, Stir Stix were made. You can either wipe these stix off with rubbing alcohol (while wet) for immediate reuse or wait till the resin or paint has set and just easily peel the set resin or paint right off. For best results we recommend peeling off the paper before use but we have had reports from people that say that they leave the film on for the first use and then peel them after using for a while. To remove the brown film just use anything with a hard edge along the side of the brown film to begin the tear. At times these clear products can get back ordered so please allow a 4 day turn around time (at most) - this is due to the demand of our clients and the substrate manufacturer. This instance is uncommon but we appreciate your understanding should it occur with your order. the coasters come with a brown paper protecting both sides. For best results we recommend peeling off only ONE side of the paper and leave the back side's paper. Pour your art onto the side that you removed the brown film from. Once your coaster has completely set you can remove the brown film from the bottom/back - leaving you with coasters that require no maintenance or cleanup. To remove the brown film just use anything with a hard edge along the side of the brown film to begin the tear. The products are still evolving so if you have any recommendations or suggestions, please feel free to reach out to us!! Please be advised - as with all things cut with a laser - the edges may be sharp. Please use these items with caution - especially when running your finger along any edges. Best use is to slightly sand the edges to ensure that they are more smooth and less likely to have any rough or sharp lines. ATD and our staff cannot be held liable for accidents as a result of failure to comply with these usage directions and advice. Clear stix stix etched stir clear stick sticks stixs